Whether you are new to O'melon or a regular user, this comprehensive guide is designed to provide you with a thorough understanding of the product.
#TAKEYOURPICK
What do you want to know more of? Select the content below and head to the answer straightaway~
- How to assemble the machine?
- Skincare routine with O'melon
- Machine maintenance
1. Open the box. Take out the machine and the charger.
2. Locate the charging port and insert the charger securely.
3. Press and hold the "open" button. Lift up the lid of the machine.
4. Take out the spray gun and outlet host. Locate the side with the smaller lock screw. This side is to be attached to the spray gun.
5. Hold the lock screw to the attachment on the spray gun. Turn the screw towards the right, in an anti-clockwise direction, till it is fully secured.
6. Attach the other side of the outlet host to the machine. Push down the lock screw till you hear a "click" sound.
7. Take one ampoule and turn open the cap. Attached the ampoule to the spray gun by turning towards the right, in an anti-clockwise direction, till it's fully secured.
8. Remember to turn on the power switch. Press the "on/off" button on the machine to start the machine. Press down on the button of the spray gun to release the ampoule in mist form. Spray all over your face till you finish the bottle.
9. Remove the ampoule and pull the nozzle and spray gun body away from each other, to detech the nozzle for replacement/cleaning.
☀️
Morning Routine
- Step 1 (Cleansing): Wash your face with facial cleanser
- Step 2 (Toner): Apply toner (recommendation: Volume Tox Original Booster)
- Step 3 (Ampoule): Use half a bottle of the O'melon Hyalupine Ampoule with the machine
- Step 4 (Moisturiser): Apply a thin layer of moisturiser (recommendation: Volume Tox Original Snail Cream)
- Step 5 (Sunblock): Protect your skin with a moisturising sunblock
- Step 6 (Make-up): Do your make-up as per normal
- Step 7 (Setting spray): Set your make-up with the remaining O'melon Hyalupine ampoule in the bottle
🌙
Night Routine
- Step 1 (Cleansing): Wash your face with facial cleanser
- Step 2 (Toner): Apply toner (recommendation: Volume Tox Original Booster)
- Step 3 (Ampoule): Use finish a bottle of the O'melon Hyalupine Ampoule with the machine
- Step 4 (Moisturiser): Apply a normal to thick layer of moisturiser (recommendation: Volume Tox Original Snail Cream)
It is essential to keep your machine clean at all times to maintain optimal functionality. We recommend cleaning your device as shown below, after every use.
1. Prepare a cup of warm water (warm enough to observe steam coming out).
2. Turn on the machine and insert the tube attached to the spray gun into the water. Spray and release the mist for at least 2 minutes (or till the outlet host is fully unclogged).
3. Clean the other parts of the machine with a cloth or tissue when it's dusty or dirty.
Clean your nozzle as shown below if you experience trouble with spraying the mist.
1. Prepare a cup of warm water (warm enough to observe steam coming out).
2. Remove the ampoule and pull the nozzle and spray gun body away from each other, to detach the nozzle.
3. Let the nozzle soak in the water for at least 5 minutes to unclog any ampoule or dirt trapped inside.
中文
您想了解更多什么？选择以下内容，直接查看答案~
- 如何组装机器？
- O'melon 护肤程序
- 机器维护
1. 打开盒子。取出机器和充电器。
2. 找到充电端口并将充电器插入牢固。
3. 按住“打开”按钮。提起机器的盖子。
4. 取出喷枪和出线主机管。找到具有较小锁定螺钉的一侧。此侧将连接至喷枪。
5. 将锁紧螺钉固定在喷枪上的附件上。向右逆时针方向转动螺丝，直至完全固定。
6. 将插座主机的另一侧连接至机器。向下推锁紧螺钉，直至听到“咔哒”声。
7. 取出一瓶安瓶并打开瓶盖。通过向右、逆时针方向转动，将安瓶连接到喷枪上，直至完全固定。
8. 记得打开电源开关。按机器上的“开/关”按钮即可启动机器。按下喷枪按钮，以雾状释放安瓶。喷在脸上直到用完整个瓶子。
9. 取出安瓶并将喷嘴和喷枪体拉开，以拆卸喷嘴以进行更换/清洁。
☀️
早晨程序
- 第一步（清洁）：用洗面奶洗脸
- 第二步（爽肤水）：涂抹爽肤水（推荐：Volume Tox Original Booster）
- 第三步（安瓶）：配合机器使用半瓶O'melon Hyalupine Ampoule
- 第四步（保湿）：涂上薄薄一层保湿霜（推荐：Volume Tox Original Snail Cream）
- 第五步（防晒霜）：使用保湿防晒霜保护您的皮肤
- 第六步（化妆）：按照平常的方式化妆
- 第七步（定妆）：用瓶中剩余的 O'melon Hyalupine Ampoule 定妆
🌙
夜间程序
- 第一步（清洁）：用洗面奶洗脸
- 第二步（爽肤水）：涂抹爽肤水（推荐：Volume Tox Original Booster）
- 第三步（安瓶）：用机器喷完一瓶O'melon Hyalupine Ampoule
- 第四步（保湿霜）：涂抹一层普通至厚厚的保湿霜（推荐：Volume Tox Original Snail Cream）
始终保持机器清洁以保持最佳功能至关重要。我们建议您在每次使用后按如下所示清洁您的设备。
1. 准备一杯温水（水温足以观察蒸汽冒出）。
2. 打开机器并将喷枪上的管子插入水中。喷洒并释放雾气至少两分钟（或直至出口主机完全疏通）。
3. 当机器的其他部件有灰尘或脏污时，请用布或纸巾清洁机器的其他部件。
如果您在喷雾时遇到问题，请按下图所示清洁喷嘴。
1. 准备一杯温水（水温足以观察蒸汽冒出）。
2. 取出安瓶并将喷嘴和喷枪体拉开，以拆卸喷嘴以进行更换/清洁。
3. 让喷嘴在水中浸泡至少 5 分钟，以疏通内部的堵塞物或污垢。